Plumber connecting a water softener to a home's main water line

Home/Water Purification Company/Water Softener Installation

Water Softeners

Water Softener Installation in Cleveland, TN

Hard water leaves crust on faucets and scale in your water heater. We test your water first, and if a softener is the answer, we plumb it in right.

Water Softener Installation

Soft Water Starts at the Main Line

A softener is only as good as the plumbing it's tied into. The tank is the easy part. The cut-in is the job.

Grizzly Plumbing installs water softeners in Cleveland, TN homes. A softener takes out the calcium and magnesium that make water hard, the minerals behind white crust on faucets, spots on glasses and scale inside your water heater. It's one half of what we do as a water treatment company; filtration is the other, and the two fix different problems. If you're not sure which one your water needs, start with whole-home water filtration and purification and we'll sort it out from there.

One thing to know up front: city water in Cleveland isn't very hard. That's why water heaters around here last so long. So a softener isn't automatic in town. We test your water first, and if it isn't hard enough to need one, we'll tell you before you buy. If it is, here's what a proper install includes.

  • Softener set on the main line, before the water heater, so hot water is softened too
  • Bypass valve, so the house keeps water if the unit ever needs service
  • Drain line with an air gap, so rinse water can't back up into your supply
  • Hardness setting based on your test number, not a guess

We're bonded and insured and a member of the Better Business Bureau. You see the price before any work starts, and the number we quote is the number you pay.

Reach Us Direct
Call or Text
Based In
Cleveland, TN 37312
Hours
Open 24/7 for emergencies
Plumbing Emergency?

Don't wait on a form. Call (423) 380-8009 now.

Water softener and brine tank installed in a utility room
Signs

Is Your Water Hard Enough to Need One?

Crust that keeps coming back

White, chalky buildup around faucets, shower heads and drains that returns soon after you clean it. That's mineral scale, and it's the clearest sign.

Spots and film

Cloudy glasses straight out of the dishwasher, a ring in the tub, shower glass that won't come clean, soap that won't lather. Hard water makes soap scum instead of suds.

A noisy water heater

Popping or rumbling while it heats is often scale sitting in the bottom of the tank. A softener can't remove what's already there, but it stops new buildup from that point on.

A real number, not a guess

Hardness is measured in milligrams per liter. On the USGS hardness scale, 0 to 60 is soft and anything past 120 is hard. We test at the tap and show you where your water lands before we talk about a softener.

Honest Options

When a Softener Isn't the Right Fix

Some problems look like hard water and aren't. We'd rather tell you that at the tap than after the install.

Chlorine taste or smell

A softener doesn't touch chlorine. City water here is treated with it, and if that's what bothers you, filtration is the answer, not a softener. Some homes end up with both.

Rusty or brown water

Orange stains and rusty-looking water usually come from old galvanized steel pipe corroding on the inside. A softener won't fix that. The pipe needs attention, and in a badly corroded house that can mean whole-home repiping before any new equipment goes in.

A softener that's already there

If you have one and the water still feels hard, don't buy another yet. An empty brine tank, a bypass left open after a repair, or a control head reset by a power outage are all small fixes.

Only one fixture

One dripping faucet or one sputtering shower head while the rest of the house is fine points to a worn part in that fixture, not your water. A faucet or shower repair costs a lot less than a softener.

Hard water mineral buildup on a kitchen counter and faucet
Plumber tightening a drain fitting during a water softener installation
What to Expect

How a Water Softener Installation Goes

Most of the work happens at one spot on your main line. Older homes around Cleveland mostly run galvanized steel or CPVC, and we've reworked plenty of handyman setups that never saw a code book. We tie the softener into the lines you have, with quality parts.

Test, options, price

We check your hardness, look at the pipe where the water comes in, and lay out the choices and the price. If the old pipe at the hookup point needs a short section replaced, you hear that now, not halfway through the job.

Shut off and cut in

With the water off and the line drained, we cut into the main, fit the bypass and make the connections. This is the step that matters most, and it's where fittings have to match the pipe you actually have.

Tanks, drain and power

The softener and brine tank go on a level spot near an outlet. The drain line runs with an air gap, and the brine tank overflow is tied in so a stuck float can't flood the floor.

Start-up and settings

Water back on slowly, air bled out, salt added, and the control head set to your real hardness number. Too low and the water stays hard; too high and you waste salt. We run the first cycle and check every joint before we leave.

Pricing

What Drives Water Softener Installation Cost

The size of unit your water calls for, how hard it tests, how much water your household uses, the condition of the pipe at the cut-in point, how far that spot is from a drain and an outlet, and whether there's an old unit or a past handyman job to undo first all dictate what a softener install costs. Adding a filter on the same visit saves a second shutoff.

Whatever your setup, we give you the price before any work starts, and we won't upsell you. You get options instead of an upsell, and you pay when the job is done. Owning a softener has a small running cost of its own: salt on a regular basis, plus some water and power each time it cleans itself.

Good to Know

Water Softener Questions

Is Cleveland water hard enough to need a softener?

Usually not very. City water in Cleveland isn't especially hard, which is why water heaters here often last well past 10 years. Some homes still test hard enough that a softener makes sense, and the only way to know is a test. We do that first, and if your number is low, we'll say so.

Will a water softener fix the chlorine taste?

No. A softener removes calcium and magnesium, not chlorine. Chlorine taste or smell is a filtration job, and if that's your main complaint, a filter is where to start. Homes with both problems can run a filter and a softener together.

What does a softener do for my water heater?

Hard water leaves scale inside the tank as it heats, which makes the heater work harder and shortens its life. A softener stops new scale from forming. It doesn't remove scale that's already there, so if your heater is old and struggling, replacing it first and softening after is often the better order.

Hard Water Problems?

Free estimates. Honest options. We test before we sell you anything.